Awning rail hooks..

Shadrack · Jul 10, 2019

Can anyone point me in a direction of where I could buy some hooks that I could slide into the unused awning rail on the other side of my California?

Thank you in advance.

sapto · Jul 10, 2019

Shadrack said:
Can anyone point me in a direction of where I could buy some hooks that I could slide into the unused awning rail on the other side of my California?

Thank you in advance.

I found some great pieces at peggy pegs:

https://www.alternate.ch/html/product/1515223?campaign=1681476444&adgroup=69168773961//Mobil&gclid=EAIaIQobChMIz_uZje6q4wIVDsayCh1e6gYyEAQYByABEgL7IfD_BwE

Or use just the ones from the calicap?

Perfectos · Jul 10, 2019

Big Ted forum member does a lot of bits and bobs including hooks, washing lines etc which make use of the spare rail.

Hotel California · Jul 10, 2019

Seems the OP is referring to the brandruprail on the leftside of the verhicle so some of the examples above will not fit....
The ones @Bigted makes and sells do fit the brandruprail

Shadrack · Jul 12, 2019

Hi Everyone,
Thank you for your suggestions, after looking at what was required I decided to fabricate what I needed.
I cut up a piece of pipe from an old garden sprayer, with a few small holes drilled and some bungee cord I came up with the following which seems to do the trick. (Pictures to follow)

Whilst constructing I noticed a half bag of stainless nyloc nuts(after cutting and drilling the tube) and with a bit of bungee found they would also serve the purpose.
The Nyloc have rounded edges so with two nuts and the knot in between it would avoid any fraying of the bungee cord.

Big thanks to previous suggestions and comments.

Cheers.