Windscrean Washer nozzle

[JDVKTM]

The left side windscrean washer (heated) on my T5 only sprays to the right

Can it be cleaned or do I need to replace ?

Thanks for any feedback

 

[WelshGas]

The left side windscrean washer (heated) on my T5 only sprays to the right

Can it be cleaned or do I need to replace ?

Thanks for any feedback

What does the R hand one do?

Normally the Nozzle can be adjusted L-R and Up - Down. Just insert a pin into the nozzle and turn it to point at the L Screen.

 

[SimonB]

The end of the nozzle is like a ball bearing with a hole through it. As @WelshGas says, put a pin, needle or unfolded paperclip into it, that should clean out any obstruction in it and then move it round to point where you want it to.

 

[JDVKTM]

Thanks, the right hand side spray's a left and right stream; the left hand side one only a right side stream

 

[WelshGas]

Thanks, the right hand side spray's a left and right stream; the left hand side one only a right side stream

Just try a sewing pin or needle in the nozzle, probably 2 per side and probably blocked. Should clear with the needle. If not just remove from bonnet and reverse flush or blow down the nozzles.

 

[JDVKTM]

Thanks WelsGas , they're working fine after I unclipped it from the bonnet and cleaned it with a needle