Can anybody help me out on this

[Passatwind]

When i check my Cali with VCDS i get the following faults:

1 Fault Found:
01592 - Air Quality Sensor (G238)
010 - Open or Short to Plus

1 Fault Found:
01330 - Central Control Module for Central Convenience (J393)
004 - No Signal/Communication - Intermittent

3 Faults Found:
01336 - Company Data Bus for Comfort System
49-10 - No Communications - Intermittent
01330 - Central Control Module for Central Convenience (J393)
49-10 - No Communications - Intermittent
01304 - Radio
49-00 - No Communications

3 Faults Found:
01336 - Company Data Bus for Comfort System
49-10 - No Communications - Intermittent
01330 - Central Control Module for Central Convenience (J393)
49-10 - No Communications - Intermittent
01304 - Radio
49-00 - No Communications


1 Fault Found:
00912 - Window Regulator Switch; Front Left (E40)
27-10 - Implausible Signal - Intermittent

1 Fault Found:
01546 - Sensor for Parking Aid; Rear Mid-Left (G204)
37-00 - Faulty

2 Faults Found:
02366 - Pinch Protection
011 - Open Circuit - Intermittent
01330 - Central Control Module for Central Convenience (J393)
004 - No Signal/Communication - Intermittent

I don't know where to start a search to solve the problem.
I hope you can help me and thanks in advance.

Regards, Willem

 

[WelshGas]

When i check my Cali with VCDS i get the following faults:

1 Fault Found:
01592 - Air Quality Sensor (G238)
010 - Open or Short to Plus

1 Fault Found:
01330 - Central Control Module for Central Convenience (J393)
004 - No Signal/Communication - Intermittent

3 Faults Found:
01336 - Company Data Bus for Comfort System
49-10 - No Communications - Intermittent
01330 - Central Control Module for Central Convenience (J393)
49-10 - No Communications - Intermittent
01304 - Radio
49-00 - No Communications

3 Faults Found:
01336 - Company Data Bus for Comfort System
49-10 - No Communications - Intermittent
01330 - Central Control Module for Central Convenience (J393)
49-10 - No Communications - Intermittent
01304 - Radio
49-00 - No Communications


1 Fault Found:
00912 - Window Regulator Switch; Front Left (E40)
27-10 - Implausible Signal - Intermittent

1 Fault Found:
01546 - Sensor for Parking Aid; Rear Mid-Left (G204)
37-00 - Faulty

2 Faults Found:
02366 - Pinch Protection
011 - Open Circuit - Intermittent
01330 - Central Control Module for Central Convenience (J393)
004 - No Signal/Communication - Intermittent

I don't know where to start a search to solve the problem.
I hope you can help me and thanks in advance.

Regards, Willem

1. Which vehicle do you have. According to your Avatar information you have a T5 on order.

2. Do you have any problems with the vehicle?

3. All manner of faults of an intermittent nature can be logged and never cause a problem . Sometimes a low battery voltage can cause problems to be logged as the various electronics start up.

4. Clear the faults registered and go for a drive and then re-check for any faults.

 

[sidepod]

Looks like the CAN has lost communication with the comfort module.
You’ll need a wiring diagram and locate the module in question.
Identify the power and earth first and check.

After that identify the CAN wiring and check visually. Check for 60ohm across the CAN pair.
After that you’ll need an oscilloscope I’m afraid.

 

[Passatwind]

Hello thank you for your answers.

It all started when the electric sliding door would no longer close, at first it would open but would no longer close.
Later the door stopped responding altogether.
The problem was in the door sensor, which was located in the rubber of the sliding door, where the connections had worn through.
I then replaced this with a new one to protect people.
After that, all the problems I mentioned in my first post arose.
Tonight I actually checked how much voltage there is on the California and that is 10.5 volts with the charger after a day of charging.
It appears that 1 of the three batteries is defective and I think it is the house battery.
I also have to reset the date on the display every time and it seems as if the power has gone away and then comes back again.
Tomorrow I will check everything again and in any case replace the house battery.
I have already tested the other two batteries and the motorcycle battery was replaced with a new one three weeks ago.
If you have any tips, I would love to hear them and thank you very much in advance,

regards,
Willem

 

[WelshGas]

Hello thank you for your answers.

It all started when the electric sliding door would no longer close, at first it would open but would no longer close.
Later the door stopped responding altogether.
The problem was in the door sensor, which was located in the rubber of the sliding door, where the connections had worn through.
I then replaced this with a new one to protect people.
After that, all the problems I mentioned in my first post arose.
Tonight I actually checked how much voltage there is on the California and that is 10.5 volts with the charger after a day of charging.
It appears that 1 of the three batteries is defective and I think it is the house battery.
I also have to reset the date on the display every time and it seems as if the power has gone away and then comes back again.
Tomorrow I will check everything again and in any case replace the house battery.
I have already tested the other two batteries and the motorcycle battery was replaced with a new one three weeks ago.
If you have any tips, I would love to hear them and thank you very much in advance,

regards,
Willem

There are 3 batteries on the California.
The engine battery , under the bonnet, that starts the engine and runs the vehicle.
The 2 leisure batteries, 1 under the Front drivers seat and 1 under the rear wardrobe. These 2 batteries are wired in parallel and power the fridge, water pump,, diesel parking heater, roof and lights and sockets in the habitation area.
These 2 batteries are connected by a 75 amp cube fuse on the +tve pole of the rear leisure battery.
Check the cube fuse.
When connected to the mains does the voltage rise on the control panel to 13.4 v upto 14.4 v?
If the voltage does not rise then the Mains charger is not working.
If the voltage rises but the voltage drops to , as you said 10.5v, when the mains is disconnected then the Leisure batteries have failed, one or both. If that is the case BOTH leisure batteries should be replaced.

 

[Passatwind]

Good morning and thank you for your answers,

Today I will check all the batteries and hope that the problem has been solved. It is strange that when I look at the display a message appears with the message "cable?".
It seems like more and more errors are occurring even though I haven't actually removed anything except replacing the door seal.
Is this because it is an extremely complex system or can these problems occur as a kind of chain reaction when there is a bad battery in the camper?
I'm going to check everything today and hope that it has been resolved because I'm slowly starting to get tired of it.
Thank you again in advance for your thoughts and I hope to be able to report tonight that everything is okay again.

regards,
Willem

 

[Passatwind]

Good morning,

I checked all the batteries yesterday and the battery in the back of the camper was almost empty. I then connected the power cable, but after a while a message "cable?" appeared on the display. and there was a ping ping ping sound. It stopped a moment later and then came back.
I then retested all the fuses, including those under the driver's seat and under the hood, all of which were intact.
The sliding door only responds to the remote control, but then I only hear a tap and nothing happens.
There is no response at all to the controls on the sliding door itself, it seems as if there is no power to the door.
I'm just curious what the cable that is at the roller at the top of the sliding door does, is that a sliding contact?
Here is also my last VCDS check, perhaps you can make something out of it, thank you very much in advance for your responses and I hope that I will find a solution today.

Sunday,19,May,2024,18:59:29:08012
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8 x64
VCDS Version: 24.5.0.0 (x64)
Data version: 20240429 DS355.0
www.Ross-Tech.com


VIN: WV2ZZZ7HZ6H131723 License Plate:


Chassis Type: 7H (7H - VW Transporter/Multivan (2003 > 2010))
Scan: 01 02 03 08 09 0B 0D 15 16 17 18 19 1C 22 2D 37 45 46 47 56
57 6E 76 77 78 7D

VIN: WV2ZZZ7HZ6H131723 Mileage: 309930km-192581miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: 070-906-016-BPC.clb
Part No SW: 070 997 016 M HW: 070 906 016 CG
Component: R5 2,5L EDC G000AG 2605
Revision: --H02--- Serial number: VWZ7Z0F3862428
Coding: 0001075
Shop #: WSC 43253 001 1048576
VCID: 244D19C5E4C4B3B607-513C
VINID: 9E60AAAAA1D8A866010C11C20C0EA83B4A

No fault code found.
Readiness: 0 0 0 0 1

-------------------------------------------------------------------------------
Address 02: Auto Trans Labels: 09G-927-750.clb
Part No SW: 09K 927 750 K HW: 09K 927 750 K
Component: AQ 250 6F 0864
Revision: 00H36000 Serial number:
Coding: 0000072
Shop #: WSC 02744 790 00000
VCID: 3D7BCCA1676EE27E68-515A

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 7H0-907-37x-ESP-F.lbl
Part No: 7H0 907 379 L
Component: ESP FRONT MK25 0203
Coding: 0006187
Shop #: WSC 02744 790 00000
VCID: 3E79CBAD6A68F96671-5120

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 7Hx-907-040.clb
Part No: 7H5 907 040 C
Component: CLIMAtronic T5 4221
Coding: 0011030
Shop #: WSC 02744 790 00000
VCID: 2B5FF2F9891A7CCEC6-5120

Subsystem 1 - Part No: 7H7 907 049 A
Component: Display_2_ClimaT5 X 0307

1 Fault Found:
01592 - Air Quality Sensor (G238)
010 - Open or Short to Plus

-------------------------------------------------------------------------------
Address 09: Cent. Elect. Labels:. 7H0-937-049.lbl
Part No: 7H0 937 049 AA
Component: BORDNETZ SGVER 1.0 2001
Coding: 0000358
Shop #: WSC 02744 790 00000
VCID: 71E320916BB6561EBC-5120

2 Faults Found:
00910 - Indicator Lamp for Emergency Flashers (K6)
007 - Short to Ground - Intermittent
00078 - Battery Cut Out Relay (J7)
007 - Short to Ground

-------------------------------------------------------------------------------
Address 0B: Sec. Air Heating Labels: 7H0-819-002.clb
Part No: 7H0 819 002 M
Component: Luftstandheizung, D 0428
Revision: 00052428 Serial number: 0097616
Shop #: WSC 00000 000 00000
VCID: 3065E595A03C1F16F3-4B32

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags Labels: 6Q0-909-605-VW5.lbl
Part No: 1C0 909 605 F
Component: 11 AIRBAG VW61 0R 0003
Coding: 12593
Shop #: WSC 02744
VCID: 27570EC9C5F258AE22-5120

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 1J0-907-487-A.lbl
Part No: 1J0 907 487 C
Component: Lenkradelektronik 0006
Coding: 00119
Shop #: WSC 02744
VCID: 3163E091FB36161EFC-513C

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments Labels: 7Hx-920-xxx-17.lbl
Part No: 7H5 920 872 E
Component: KOMBI+WEGFAHRSP VDO V02
Coding: 05112
Shop #: WSC 00106
VCID: 356BD4810F5E3A3EA0-5120
WV2ZZZ7HZ6H131723 VWZ7Z0F3862428

1 Fault Found:
01304 - Radio
49-00 - No Communications

-------------------------------------------------------------------------------
Address 18: Aux. Heat Labels: 7H0-819-008.clb
Part No: 7H0 815 071 E
Component: Standheizung 0207
Shop #: WSC 00000 000 00000
VCID: 2A51F7FD86E065C63D-5120

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 6N0-909-901-19.clb
Part No: 6N0 909 901
Component: Gateway K<->CAN 0001
Coding: 00006
Shop #: WSC 02744
VCID: 70E5259530BC5F16B3-5120

1 Fault Found:
01304 - Radio
49-00 - No Communications

-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 7H0-959-433.lbl
Part No: 7H0 959 433 B
Component: C2L Komfortgerát 0004
Coding: 00073
Shop #: WSC 02744
VCID: 3261EF9DFE302D0685-4B00

Subsystem 1 - Part No: 7H1959801A
Component: Tõrsteuer.FS KLO 0203

Subsystem 2 - Part No: 7H1959802A
Component: Tõrsteuer.BF KLO 0203

No fault code found.

-------------------------------------------------------------------------------
Address 76: Park Assist Labels: 7E0-919-283.lbl
Part No: 7E0 919 283
Component: Parkingsyst. T5 T5M 801
Coding: 11127
Shop #: WSC 02744
VCID: 6CDD31E51C94BBF68F-513C

No fault code found.

-------------------------------------------------------------------------------
Address 77: Telephone Labels: 7H0-035-729.clb
Part No: 7H0 035 729 F
Component: CIB PAH HW 204 SW 0309
Coding: 0000364
Shop #: WSC 02744 790 00000
VCID: 2F67E6E9BD0200EEEA-5120

No fault code found.

-------------------------------------------------------------------------------
Address 78: Slide Door, Right Labels: Redir Fail!
Part No: 7H0 959 243 J
Component: Schiebetuer-SG 404 0320
Shop #: WSC 00000 000 00000
VCID: 3973D8B17346DE5E44-5120

No fault code found.

End-------------------------(Elapsed Time: 05:36)--------------------------

 

[WelshGas]

Good morning,

I checked all the batteries yesterday and the battery in the back of the camper was almost empty. I then connected the power cable, but after a while a message "cable?" appeared on the display. and there was a ping ping ping sound. It stopped a moment later and then came back.
I then retested all the fuses, including those under the driver's seat and under the hood, all of which were intact.
The sliding door only responds to the remote control, but then I only hear a tap and nothing happens.
There is no response at all to the controls on the sliding door itself, it seems as if there is no power to the door.
I'm just curious what the cable that is at the roller at the top of the sliding door does, is that a sliding contact?
Here is also my last VCDS check, perhaps you can make something out of it, thank you very much in advance for your responses and I hope that I will find a solution today.

Sunday,19,May,2024,18:59:29:08012
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8 x64
VCDS Version: 24.5.0.0 (x64)
Data version: 20240429 DS355.0
www.Ross-Tech.com


VIN: WV2ZZZ7HZ6H131723 License Plate:


Chassis Type: 7H (7H - VW Transporter/Multivan (2003 > 2010))
Scan: 01 02 03 08 09 0B 0D 15 16 17 18 19 1C 22 2D 37 45 46 47 56
57 6E 76 77 78 7D

VIN: WV2ZZZ7HZ6H131723 Mileage: 309930km-192581miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: 070-906-016-BPC.clb
Part No SW: 070 997 016 M HW: 070 906 016 CG
Component: R5 2,5L EDC G000AG 2605
Revision: --H02--- Serial number: VWZ7Z0F3862428
Coding: 0001075
Shop #: WSC 43253 001 1048576
VCID: 244D19C5E4C4B3B607-513C
VINID: 9E60AAAAA1D8A866010C11C20C0EA83B4A

No fault code found.
Readiness: 0 0 0 0 1

-------------------------------------------------------------------------------
Address 02: Auto Trans Labels: 09G-927-750.clb
Part No SW: 09K 927 750 K HW: 09K 927 750 K
Component: AQ 250 6F 0864
Revision: 00H36000 Serial number:
Coding: 0000072
Shop #: WSC 02744 790 00000
VCID: 3D7BCCA1676EE27E68-515A

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 7H0-907-37x-ESP-F.lbl
Part No: 7H0 907 379 L
Component: ESP FRONT MK25 0203
Coding: 0006187
Shop #: WSC 02744 790 00000
VCID: 3E79CBAD6A68F96671-5120

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 7Hx-907-040.clb
Part No: 7H5 907 040 C
Component: CLIMAtronic T5 4221
Coding: 0011030
Shop #: WSC 02744 790 00000
VCID: 2B5FF2F9891A7CCEC6-5120

Subsystem 1 - Part No: 7H7 907 049 A
Component: Display_2_ClimaT5 X 0307

1 Fault Found:
01592 - Air Quality Sensor (G238)
010 - Open or Short to Plus

-------------------------------------------------------------------------------
Address 09: Cent. Elect. Labels:. 7H0-937-049.lbl
Part No: 7H0 937 049 AA
Component: BORDNETZ SGVER 1.0 2001
Coding: 0000358
Shop #: WSC 02744 790 00000
VCID: 71E320916BB6561EBC-5120

2 Faults Found:
00910 - Indicator Lamp for Emergency Flashers (K6)
007 - Short to Ground - Intermittent
00078 - Battery Cut Out Relay (J7)
007 - Short to Ground

-------------------------------------------------------------------------------
Address 0B: Sec. Air Heating Labels: 7H0-819-002.clb
Part No: 7H0 819 002 M
Component: Luftstandheizung, D 0428
Revision: 00052428 Serial number: 0097616
Shop #: WSC 00000 000 00000
VCID: 3065E595A03C1F16F3-4B32

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags Labels: 6Q0-909-605-VW5.lbl
Part No: 1C0 909 605 F
Component: 11 AIRBAG VW61 0R 0003
Coding: 12593
Shop #: WSC 02744
VCID: 27570EC9C5F258AE22-5120

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 1J0-907-487-A.lbl
Part No: 1J0 907 487 C
Component: Lenkradelektronik 0006
Coding: 00119
Shop #: WSC 02744
VCID: 3163E091FB36161EFC-513C

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments Labels: 7Hx-920-xxx-17.lbl
Part No: 7H5 920 872 E
Component: KOMBI+WEGFAHRSP VDO V02
Coding: 05112
Shop #: WSC 00106
VCID: 356BD4810F5E3A3EA0-5120
WV2ZZZ7HZ6H131723 VWZ7Z0F3862428

1 Fault Found:
01304 - Radio
49-00 - No Communications

-------------------------------------------------------------------------------
Address 18: Aux. Heat Labels: 7H0-819-008.clb
Part No: 7H0 815 071 E
Component: Standheizung 0207
Shop #: WSC 00000 000 00000
VCID: 2A51F7FD86E065C63D-5120

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 6N0-909-901-19.clb
Part No: 6N0 909 901
Component: Gateway K<->CAN 0001
Coding: 00006
Shop #: WSC 02744
VCID: 70E5259530BC5F16B3-5120

1 Fault Found:
01304 - Radio
49-00 - No Communications

-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 7H0-959-433.lbl
Part No: 7H0 959 433 B
Component: C2L Komfortgerát 0004
Coding: 00073
Shop #: WSC 02744
VCID: 3261EF9DFE302D0685-4B00

Subsystem 1 - Part No: 7H1959801A
Component: Tõrsteuer.FS KLO 0203

Subsystem 2 - Part No: 7H1959802A
Component: Tõrsteuer.BF KLO 0203

No fault code found.

-------------------------------------------------------------------------------
Address 76: Park Assist Labels: 7E0-919-283.lbl
Part No: 7E0 919 283
Component: Parkingsyst. T5 T5M 801
Coding: 11127
Shop #: WSC 02744
VCID: 6CDD31E51C94BBF68F-513C

No fault code found.

-------------------------------------------------------------------------------
Address 77: Telephone Labels: 7H0-035-729.clb
Part No: 7H0 035 729 F
Component: CIB PAH HW 204 SW 0309
Coding: 0000364
Shop #: WSC 02744 790 00000
VCID: 2F67E6E9BD0200EEEA-5120

No fault code found.

-------------------------------------------------------------------------------
Address 78: Slide Door, Right Labels: Redir Fail!
Part No: 7H0 959 243 J
Component: Schiebetuer-SG 404 0320
Shop #: WSC 00000 000 00000
VCID: 3973D8B17346DE5E44-5120

No fault code found.

End-------------------------(Elapsed Time: 05:36)--------------------------

1. Those VCDS faults are not significant. Have you cleared them and see if any return?
2. You have a dead leisure battery. Are they original?
If they are original BOTH should be changed.
If they are not original you could try removing the flat battery and charge it up with a Smart Charger. But why is it flat? Is the 75amp cube fuse OK?
3. Sliding door . You say it does not respond to the controls on the door, only the Remote. Is that correct?
Check to see if the Child Lock is activated.
What about the Dashboard controls. Do they work? Is the door switched to Manual?

 

[pluc99]

With all the different things you are throwing into the thread it becomes a bit difficult to understand what the problem or problems are. If I were you I would focus on the 2 camping (leisure) batteries first. If the rear one is almost empty then it need replacing and you should do this before you worry about the other problems:

• the cube fuse near the rear battery needs to be replaced
• the rear battery needs replacing
• the battery under the seat should be replaced at the same time even if it still holds a bit of charge

When you replace the batteries be sure to charge them both to 100% before installing them; don't assume they are fully charged just because they are new. Don't forget to put in a new cube fuse.

 

[Passatwind]

First of all, thank you for your thoughts

I have indeed reset the errors and they come back but not always.
The battery under my seat has been tested and found to be good and yesterday I installed a fully charged battery for the battery in the back.
If I now connect the power cable to 230 volts, I get the message "cable?" on the household display. and hear beeps.
1 of the 2 batteries is original and the other is not, but in good condition.
I can't find a fuse anywhere near the rear battery, can you please indicate where it is located?
I also checked whether the child lock was on, but that was not the case.
There is a response to the remote control in the form of a slight click, but the sliding door does nothing.
The controls on the dashboard don't work either, but I have no idea how it was or could be set to manual.
Does anyone of you know how to set the sliding door to manual mode?

Thank you very much again for your responses.

 

[pluc99]

The cube fuse is (or should be) on the rear leisure battery positive terminal. See this thread:
https://vwcaliforniaclub.com/threads/fuse-on-positive-leisure-battery-terminal.19122/post-219266

 

[WelshGas]

First of all, thank you for your thoughts

I have indeed reset the errors and they come back but not always.
The battery under my seat has been tested and found to be good and yesterday I installed a fully charged battery for the battery in the back.
If I now connect the power cable to 230 volts, I get the message "cable?" on the household display. and hear beeps.
1 of the 2 batteries is original and the other is not, but in good condition.
I can't find a fuse anywhere near the rear battery, can you please indicate where it is located?
I also checked whether the child lock was on, but that was not the case.
There is a response to the remote control in the form of a slight click, but the sliding door does nothing.
The controls on the dashboard don't work either, but I have no idea how it was or could be set to manual.
Does anyone of you know how to set the sliding door to manual mode?

Thank you very much again for your responses.

1. All later Transporters/Californias with electric sliding doors have a switch beside the Dsshboard Sliding Door Open/Close switch that will switch the door to Manual mode. Have you such a switch?
Is the radio fitted Original?

 

[Passatwind]

is this probably the fuse you think?

 

[Passatwind]

1. All later Transporters/Californias with electric sliding doors have a switch beside the Dsshboard Sliding Door Open/Close switch that will switch the door to Manual mode. Have you such a switch?
Is the radio fitted Original?

Hello,
no i don't have that switch only one to lock the sliding door during driving.
The radio is not the original anymore so thats one of the faults reported by vcds

Thanks for your help

 

[WelshGas]

Hello,
no i don't have that switch only one to lock the sliding door during driving.
The radio is not the original anymore so thats one of the faults reported by vcds

Thanks for your help

Yes, ignore the VCDS radio faults.

 

[sidepod]

I’m confused. What happened to the CAN comms fault in the original post??

 

[Passatwind]

Good morning,
yes, I am also very surprised, perhaps the total DCT reset has finally resolved a number of errors.
Today I will check whether the 75 amp fuse is broken and if that is indeed the case, I hope that the sliding door will also work again.
I'll let you know when it all works again.
If that is not the case, I hope you will share your thoughts again.
Thank you in advance.

 

[Passatwind]

Good evening,

After days of searching I gave up and don't think I can solve this myself.
I checked all fuses again and the battery voltage as well as the relays, but no defects were found.
It seems as if the sliding door is not receiving power, although a click can be heard when I press the remote control.
The controls on the door itself give no response at all.
An additional problem is that the display does not indicate when the car is on 230 volts (charging cable) and the G remains in the display and therefore probably does not charge.
I also have to reset the clock in the control display every time.
This actually means that the tension drops every now and then.

Who has the golden tip for the sliding door and the loss of power?

Thank you very much again for your help

 

[WelshGas]

Good evening,

After days of searching I gave up and don't think I can solve this myself.
I checked all fuses again and the battery voltage as well as the relays, but no defects were found.
It seems as if the sliding door is not receiving power, although a click can be heard when I press the remote control.
The controls on the door itself give no response at all.
An additional problem is that the display does not indicate when the car is on 230 volts (charging cable) and the G remains in the display and therefore probably does not charge.
I also have to reset the clock in the control display every time.
This actually means that the tension drops every now and then.

Who has the golden tip for the sliding door and the loss of power?

Thank you very much again for your help

1. The Sliding Door malfunction has nothing to do with the Leisure Batteries.
Check the Cube fuse.
When you are on Mains Hookup does the Mains socket on the kitchen unit work?
If it does and the Charger doesn't show the Plug icon on the Control Panel then check the IC Mains plug into the Charger, it can come loose.
Next check the Control Panel

Check Control Panel Diagnostics.

Control Panel Off and wait 30 secs

Control Panel On

Press and Hold R lower button and then press Control Knob for 5 secs.

New Hidden Menu . Scroll to VW Diagnostics.

If there are any codes shown, take note and then Reset/Clear.

Return to Main Menu.

Switch Off Control Panel using L lower button. Wait 30 secs and Switch On.

Try Roof/Heater or Fridge



2. Your last VCDS readout showed No Fault on the Right Sliding Door.
It sounds as if you are unlocking the Sliding Door with the Remote. but it is not opening.
Check all 30amp fuses under front drivers seat.

Have you checked the Handbook regarding operation of the Electric Sliding door. I'm very surprised there isn't someway to switch it to manual.

 

[fluff34567]

On the dashboard are your electric door buttons, there should be a button with the sliding door symbol and "OFF"..... press that then try to open the door from outside with the handle, do not use the remote.

Did you check the cube fuse on the leisure battery? Your photo wasn't clear and doesn't look correct, what's the broken pink rubber on the cable terminal?

 

[Passatwind]

1. The Sliding Door malfunction has nothing to do with the Leisure Batteries.
Check the Cube fuse.
When you are on Mains Hookup does the Mains socket on the kitchen unit work?
If it does and the Charger doesn't show the Plug icon on the Control Panel then check the IC Mains plug into the Charger, it can come loose.
Next check the Control Panel

Check Control Panel Diagnostics.

Control Panel Off and wait 30 secs

Control Panel On

Press and Hold R lower button and then press Control Knob for 5 secs.

New Hidden Menu . Scroll to VW Diagnostics.

If there are any codes shown, take note and then Reset/Clear.

Return to Main Menu.

Switch Off Control Panel using L lower button. Wait 30 secs and Switch On.

Try Roof/Heater or Fridge



2. Your last VCDS readout showed No Fault on the Right Sliding Door.
It sounds as if you are unlocking the Sliding Door with the Remote. but it is not opening.
Check all 30amp fuses under front drivers seat.

Have you checked the Handbook regarding operation of the Electric Sliding door. I'm very surprised there isn't someway to switch it to manual.

Thank you for your help and I will check all this today.
The cube fuse is not present on my leisure battery, I ordered one yesterday and am going to install it this week.
There was one there, but I think the previous owner of my California removed it, I hope no further damage was caused as a result.
I also get the idea that the sliding door is disabled by software, but I have no idea where to look for that.
Maybe you can activate that again with a code in VCDS.
Thank you very much for your tips and thoughts.
Regards, Willem

 

[Passatwind]

On the dashboard are your electric door buttons, there should be a button with the sliding door symbol and "OFF"..... press that then try to open the door from outside with the handle, do not use the remote.

Did you check the cube fuse on the leisure battery? Your photo wasn't clear and doesn't look correct, what's the broken pink rubber on the cable terminal?

First of all, thank you for your thoughts.
There is indeed a button on the dashboard that allows you to turn off the sliding door, which is more for security while driving, I think.
There is no cube fuse on the leisure battery, I think the previous owner of my California removed it. I hope this doesn't cause more damage.
I ordered one and will install it this week.

Thanks again for your help,
Regards, Willem

 

[fluff34567]

Hi Willem, The off button allows manual operation of the door, the doors are blocked from opening whilst driving.

If the fuse is removed I'm wondering why as normally there is no need to touch it.. have there been electrical modifications?

 

[Passatwind]

Hi Willem, The off button allows manual operation of the door, the doors are blocked from opening whilst driving.

If the fuse is removed I'm wondering why as normally there is no need to touch it.. have there been electrical modifications?

Hi,
I don't think any modifications have been made to my California except that the solar panel on the roof is connected to the rear battery.
I received the cube fuse today and am going to install it this week.
I still find it strange that it seems as if there is no power coming to the sliding door.
Thank you again in advance for your thoughts/answer,

Regards,
Willem

 

[sidepod]

I still find it strange that it seems as if there is no power coming to the sliding door.

We’ll fix that then first! Fitting a cube fuse won’t make and difference.
Just run a temporary supply to the door from any battery and see if that cures the problem.