ArunAlec
Super Poster
VIP Member
I have found that the sliding plastic blind above the fridge has been rubbing on the glass at the top edge where the wardrobe side meets the interior trim. This has damaged the stuck on blackout that hides the wardrobe from the outside. With careful trimming and some black insulation tape I've managed to repair the blackout but can't work out why the slider seems to be misaligned.
The the top felt protector on the blackout has been removed as it was distorted (by the friction of the blind) and the felt on the top runner removed as that had disintegrated with use. even with these removed there is friction.
My plan is to either just leave the blind in the closed position or to fit the Brandrup pockets.
Anyone else had this problem?
The the top felt protector on the blackout has been removed as it was distorted (by the friction of the blind) and the felt on the top runner removed as that had disintegrated with use. even with these removed there is friction.
My plan is to either just leave the blind in the closed position or to fit the Brandrup pockets.
Anyone else had this problem?