GC600 Locker 3D Scan

[markab]

If anyone should happen to need one, here is a 3D Scan on a 600 Rear locker that I took yesterday.

https://ff.digital3dcloud.com/space/file?shareID=890b9bbd-5f1a-5355-9afb-c5074ec11887&lang=en&loop=1

 

[GordonH]

Thats great, thank you for sharing. What did you use to do the scan (I’ve tiried Polycam on a number of occasions and parts with little success)

 

[markab]

I use an Einstar Vega scanner.

 

[markab]

Thats great, thank you for sharing. What did you use to do the scan (I’ve tiried Polycam on a number of occasions and parts with little success)

I had to use about 50 tracking markers, difficult scan with not much texture to track.

 

[markab]

Having a play around with this, will print one off next week and see if its workable.

 

[markab]

 

[Hammer]

Having a play around with this, will print one off next week and see if its workable.

View attachment 142329

looks like fab solution for bottom cupboards, watching with interest.

 

[markab]

Work continues on better pants and socks storage.

 

[Hammer]

Work continues on better pants and socks storage.

looking good

 

[markab]

First prototype...

View attachment IMG_6665.jpeg


View attachment IMG_6664.jpeg

 

[Hammer]

First prototype...

View attachment 142474


View attachment 142475

nice what printer are you using and max bed size?

 

[markab]

Bambu H2S with a 0.8 high flow nozzle, print wasn't perfect but not too far off so will make some tweeks.

Bed can go up to 340x340mm but for the locker 2 boxes at 270mm wide is about right.

Seems to be about 5hrs per box currently. Also used some PETG support interface for the overhang.

That print was a wall thickness of 3mm, will drop it to 2mm as it was plenty strong, should also be able to get 2 out of a spool then as well.

 

[Hammer]

my limit is print bed size as only 220mm but if you are happy to share 3d file I could try to do 3 boxes for wider cupboard.

 

[markab]

Yes of course, have made some tweeks and think I have it printing well now, will make a version for 3 per locker.

 

[Hammer]

Yes of course, have made some tweeks and think I have it printing well now, will make a version for 3 per locker.

Perfect thanks

 

[markab]

A variety of sizes are now uploaded here:

https://makerworld.com/en/models/2026640-vw-grand-california-lower-locker-trays#profileId-2185066

Let me know if you have any questions or need any help, the post on maker world explains the sizes and print settings that I used along with the material amounts etc.

Thanks



View attachment IMG_6670.jpeg

 

[markab]

Why does this forum keep dropping pictures in posts and making them links instead, really annoying!!

 

[markab]

Just to note this was all based on GC600, unsure if the lockers on the GC680 are the same.

 

[Hammer]

that’s great thanks for this will have play, mine is 680 so will check sizing