Reattaching tray on bottom inside of the sliding door, on which the picnic table rests.

[Jennie]

Hi, A number of years ago the small tray that the picnic table sits in on the bottom inside of the sliding door broke off- the 'plastic' studs broke off. I mended it temporarily with tape and silicon glue. OK for a bit but no good now. Anybody and ideas as to how I would reattach the tray without removing the lining panel of the sliding door?
If I have to remove the lining panel of the sliding door can somebody please explain to me (with photos) how I can remove and then replace the inner panel? I know there are some posts about this but I cannot understand it. Look forward to hearing from some members. Thanks.

 

[ArunAlec]

Hi, A number of years ago the small tray that the picnic table sits in on the bottom inside of the sliding door broke off- the 'plastic' studs broke off. I mended it temporarily with tape and silicon glue. OK for a bit but no good now. Anybody and ideas as to how I would reattach the tray without removing the lining panel of the sliding door?
If I have to remove the lining panel of the sliding door can somebody please explain to me (with photos) how I can remove and then replace the inner panel? I know there are some posts about this but I cannot understand it. Look forward to hearing from some members. Thanks.

You need to let us know details of which Cali you have and maybe a picture of the bit you are talking about. Your profile shows you have a “Motorhome”.

 

[Jennie]

Thanks ArunAlec. I do not know where the 'Motorhome' classification came from. It is a 2010 (Brand new, I have had it from then) California- in those days we did not talk about Oceans or or or...
I have attached 2 photos of what I am trying to explain and one of the van itself. From the photos I think you can see that the try for the table to be stored on has detached - the holes above are where the plastic screws/bolts were.
Appreciate your and anybody else's help please.

 

[Jennie]

Hi friends
I am still hoping for some input to my earlier post please.

 

[WelshGas]

Hi, A number of years ago the small tray that the picnic table sits in on the bottom inside of the sliding door broke off- the 'plastic' studs broke off. I mended it temporarily with tape and silicon glue. OK for a bit but no good now. Anybody and ideas as to how I would reattach the tray without removing the lining panel of the sliding door?
If I have to remove the lining panel of the sliding door can somebody please explain to me (with photos) how I can remove and then replace the inner panel? I know there are some posts about this but I cannot understand it. Look forward to hearing from some members. Thanks.

Is this of any use to you? Plan & Parts Numbers

sliding door trim; camper table - Campmob. (Typ2/Transp./LT)(CAMP) [EUROPA 2010 year]

№	part code	title	i
		sliding door trim camper table
3	7H5 867 198 A	hinge cover
	7H5867198A 3U6	artgrey
6	7H5 867 620 F	sliding door trim
	7H5867620F X30	pearl grey
7		cover not for this model
8	7H7 067 331	corner strip
10	7H7 861 171 F	camper table
12	7H7 861 203 D	locking mechanism
15	7H7 867 027	sliding door trim
(15)	7H7 867 027 A	sliding door trim for vehicles with sliding window
16	7H7 867 028 F	sliding door trim see photo
(16)	7H7 867 028 G	sliding door trim for vehicles with sliding window
(20)	7H7 867 585 A	trim
21	7H7 867 349	inlay for profile rail
25	7H0 867 289 A	clip
(25)	7H0 867 331 A	spring clip
26	7M0 867 633 F	clip
(30)	6X0 867 300 A	clip see photo
30	3B0 867 333	clip
31	3B0 867 334	grommet
33	4A0 867 276 A	clip
35	N 90504802	hexagon head bolt (combi)
36	N 0110044	hexagon nut
37	N 01152221	washer
39	7H7 867 153	rubber strap
40	WHT 000 148	hex collared bolt
41	7E7 898 209	retaining bar see photo
42	7H7 898 175	sundry parts set folding table adjusting screw
44	533 867 910 A	felt strips (self-adhesive) 'order qty. 25'
45	251 201 525	underlay
46	N 90581401	bungs
47	N 90576301	pop rivet

 

[TripleBee]

Part 15 just pulls out to the inside of the van.
Part 6 has a screw. Then gently pull upwards.
Part 16 has 3x part 35 to unscrew at the bottom.
Get the table out, and pull 16 firmly, but gently out towards the inside of the van.

This should work.

 

[westfalia]

Mine is a different panel i think
i don't see any screws inside.

 

[TripleBee]

Mine is a different panel i think
i don't see any screws inside.
View attachment 57513

If that was directed to my post, look under the table support. There should be 3 torx screws. At least in mine.

 

[westfalia]

If that was directed to my post, look under the table support. There should be 3 torx screws. At least in mine.

No

I was looking at the picture above without the track.