T6.1 Digital Cockpit disappeared

[Chris Ratay]

Greetings from Patagonia.

My digital cockpit suddenly disappeared yesterday. Twice I tried disconnecting the battery for 10 minutes, and cleared errors running both Carista and VCDS several times each.

Photos 1&2 are current - the second was after reconnecting the battery.
Photo 3 was earlier in the week with the digital cockpit working normally

 

[Hawthorn37]

I’ve found that driving the vehicle for about 30 minutes following battery disconn3ction will restore settings and eliminate error messages.

 

[Chris Ratay]

I’ve found that driving the vehicle for about 30 minutes following battery disconn3ction will restore settings and eliminate error messages.

Thanks for the comment, I drove a few hours after but no joy

 

[Mehdime]

Greetings from Patagonia.

My digital cockpit suddenly disappeared yesterday. Twice I tried disconnecting the battery for 10 minutes, and cleared errors running both Carista and VCDS several times each.

Photos 1&2 are current - the second was after reconnecting the battery.
Photo 3 was earlier in the week

View attachment 132653

View attachment 132654

View attachment 132655

What do you mean by disappeared ? It’s there on all 3 pictures.

Or do you mean that you’d like to see the two analog dials on either side? That’s controlled by one of the buttons on the steering wheel - the right-hand side cluster of button - and it’s the button that’s the bottom left.

When you press it, it cycles through the 3 different views, one of which has the two dials.

 

[andyinluton]

View 1 is a standard option
View 2 is also a standard screen showing full screen navigation, I'm guessing there are no mapped roads where you are?
view 3 is as @Mehdime said available by scrolling through the available layouts using the bottom left button on the right hand side of the steering wheel.

 

[Chris Ratay]

Thanks @Mehdime and @andyinluton - I must've hit the button without realizing.

I've been driving a lot of corrugated roads which require occasional error clearing and assumed this was a symptom of a more serious issue, especially since using the head display (photo 1) didn't help.

Even with tires down to 1.5bar(22#) there's a ton of vibration