Which projection screen

[California_Clarky]

I’m looking for projector screen for my Cali, the one that is recommended is a 40/43, does a 43 inch screen actually fit okay in the California I’m thinking about maybe having an option to either put it in the front by the seats or above the backseat

 

[wildslammer22]

I’m looking for projector screen for my Cali, the one that is recommended is a 40/43, does a 43 inch screen actually fit okay in the California I’m thinking about maybe having an option to either put it in the front by the seats or above the backseat

You can get these from the club shop and the 40/43 fits perfectly hanging from the pop top hatch. You can then project either from the table or the kitchen worktop.

VW California T5, T6, T6.1 – Projector Screen Fitting

One of our members has a great idea to start producing a fitting kit for the following projector screen

vwcaliforniaclub.com

 

[California_Clarky]

Does the 40 inch screen fit straight across or is it diagonally across the van?

 

[California Rob]

The screen hangs down above the front seats where you climb up to the pop top. Be sure to get a projector with full keystone (up down left and right ) if your thinking to place it on the kitchen side.

 

[Ch1pbutty]

Save some cash & Just project onto the sliding door blind instead.

 

[Corradobrit]

Save some cash & Just project onto the sliding door blind instead.

Tried that the first trip out and the picture is less than ideal. Viewing is not great from the bench seat or bed, especially when there are 2+. I bought the Duronic 40" on Amazon for 26 euro and thats a far better option. Still need to get custom brackets though for easier hanging.

 

[The Last Cali]

You can get these from the club shop and the 40/43 fits perfectly hanging from the pop top hatch. You can then project either from the table or the kitchen worktop.

VW California T5, T6, T6.1 – Projector Screen Fitting

One of our members has a great idea to start producing a fitting kit for the following projector screen

vwcaliforniaclub.com

Hi, has anyone got another solution to get them shipped to Belgium, i calculated the shipping on the site and it cost twice the value of the parts.That is crazy.

 

[Begize]

I've got the Duronic 40/43 screen. Thought about getting the brackets, but also wanted a solution to use it in the front of the pop top when it's up.

So... bought some small "tie down" loop things (link below) and very carefully attached them to the front inside of the pop top roof using some short screws, the same width apart as the hanging loops on the top of the screen, look similar to the VW ones for the child net. I'd already got a packet of small carabiner type clips to connect one to the other.

https://www.amazon.co.uk/gp/product/B09VD5HJWV?tag=unique09f-21

Unfortunately don't seem to have any pictures, but works well, even with the top down and the hatch open. Have to turn the seats around though.

 

[Corradobrit]

I reversed the viewing position. With the roof up the 40 inch Duronic sits nicely on the small ledges. I then watch from the comfy passenger seat (LHD). Pj sits on the table. Just remember to take the screen down before lowering the bed.

 

[wildslammer22]

Hi, has anyone got another solution to get them shipped to Belgium, i calculated the shipping on the site and it cost twice the value of the parts.That is crazy.

They are 3D printed I believe, maybe you can get the pattern and get a local supplier print them for you?