What is the O ring from?

[greenfintry]

Just found this on floor in habitation part of van.... black rubber O ring about 1 inch diameter..... any clues or guesses? Thanks

 

[motacyclist]

Check the tap, it's the only thing I can think of

 

[s2bear]

There’s normally an O ring round most sink plugs. Not sure on Ocean as I have a Beach.


Sent from my iPad using Tapatalk

 

[motacyclist]

Just checked our plug, there’s no rubber ring on it. Other plugs may differ though.

 

[WelshGas]

Just found this on floor in habitation part of van.... black rubber O ring about 1 inch diameter..... any clues or guesses? Thanks

View attachment 38759

Exactly where?

 

[motacyclist]

I wonder if it’s something off the tool box thing that attaches to the back of the seat? Not taking mine off now, it’s cold outside!

 

[Emil Silenhag]

Lookes a little bit to fat...but the table has to o-rings underneath, which is part of two wheels that enable the table to slide smoothly along the runner.
Worth checking...
While you in the area, taighten the small hex-key that holds the small wheels (they are often loose) and spray som silicon in the runner and on wheels...

 

[Skewif]

an erection aide for the less gifted?

 

[ArunAlec]

an erection aide for the less gifted?

Too small!

 

[Loz]

Out of the mechanics pocket...

 

[WelshGas]

an erection aide for the less gifted?

Too small!

Don't bank on it. Have had to cut off a few when I worked in A&E at St Mary's Hospital in Praed Street, especially common in Paddington's red light district around Star Street

 

[ArunAlec]

Don't bank on it. Have had to cut off a few when I worked in A&E at St Mary's Hospital in Praed Street, especially common in Paddington's red light district around Star Street

I might have been referring to being too small

 

[WelshGas]

I might have been referring to being too small

The Ladies of the Night often provided a range of sizes.

 

[Loz]

 

[ArunAlec]

You would be if @WelshGas got near to your O ring with his scalpel!

 

[Andy]

You would be if @WelshGas got near to your O ring with his scalpel!

Lol

Sent from my SM-G950F using Tapatalk

 

[WelshGas]

You would be if @WelshGas got near to your O ring with his scalpel!

No Scalpel, we use to use a rotary ring cutter.
Often thought about using 1 metre of 1/2" linen tape and the compression technique that we used to use to get wedding rings off fingers to avoid cutting the ring.
Did have to cut a wedding ring off once that the Lady of the Night had found in the chaps wallet.