Inverter cover removal ?

[Ocean 101]

Hi
Does any one know how the inverter cover/ face plate is fixed on ?
is it glued on or screwed on from behind.
Best way to remove it and refit?

many thanks in advance

 

[Robbiemanso]

Plastic welded, only access is removing the top and bottom panels- just push fit and slide over the seat belt. Hope this helps!

 

[Meoncoast]

On our T6 I slipped a blade behind a cut and the cover off the cover. Reffitted with self tapping screws

 

[Ocean 101]

Plastic welded, only access is removing the top and bottom panels- just push fit and slide over the seat belt. Hope this helps!

Yeah found out today that the plastic is welded.
managed to get a quick peak behind the trim.
Don't fancy trying to remove the trim all together, things normally break when I do that..

Thanks for your help.

 

[Ocean 101]

On our T6 I slipped a blade behind a cut and the cover off the cover. Reffitted with self tapping screws

Did you use a Stanley blade?
Was is hard to cut the plastic?
I suppose I could always glue it back in place ....

Thanks for your help.

 

[Meoncoast]

Did you use a Stanley blade?
Was is hard to cut the plastic?
I suppose I could always glue it back in place ....

Thanks for your help.

I cannot recall what blade I used; I think it was a small hacksaw blade. 4 small black self-tapping screws worked for me and are simple to remove if required in the future.

 

[Ocean 101]

I cannot recall what blade I used; I think it was a small hacksaw blade. 4 small black self-tapping screws worked for me and are simple to remove if required in the future.

Thanks for the info...
will have a look at the weekend

many thanks

 

[Meoncoast]

Thanks for the info...
will have a look at the weekend

many thanks

here is my old post about my fixing (NB it was a Stanley blade)

Replacement of the inverter socket (230v off leisure batteries & limited to 150W)

The socket is broken and I want to replace it. Hoi can I remove IT?

vwcaliforniaclub.com

 

[Ocean 101]

here is my old post about my fixing (NB it was a Stanley blade)

Replacement of the inverter socket (230v off leisure batteries & limited to 150W)

The socket is broken and I want to replace it. Hoi can I remove IT?

vwcaliforniaclub.com

Excellent thank you