
snowy55
Top Poster
VIP Member
Just made a plate to go across the front of the drivers seat base to stop any stored items under there from coming out and going under the pedals with disastrous consequences.
I used some 1.5mm aluminium sheet and 2 M6 x 25 bolts and in true Blue Peter tradition I covered the front in black sticky "Fablon". MDF or ply wood would be ok you might need longer bolts.
Just be careful to allow room for the wire that goes up to the seat cushion not to get snagged when you rotate the seat.
I used the top one of the three holes already drilled on the "inside". of the front of the seat base




I used some 1.5mm aluminium sheet and 2 M6 x 25 bolts and in true Blue Peter tradition I covered the front in black sticky "Fablon". MDF or ply wood would be ok you might need longer bolts.
Just be careful to allow room for the wire that goes up to the seat cushion not to get snagged when you rotate the seat.
I used the top one of the three holes already drilled on the "inside". of the front of the seat base



