
Dave_T
VIP Member
- Messages
- 152
- Vehicle
- T5 SE 140
Hi all,
After coming back from the dealers after a new wiring loom to fix our persistent airbag light problem, I found some damage on the flooring.... I think that was caused by removal of the seats. I am dealing with VWCS to take it further, but what would you recommend?
ideally, a new floor should be put in, but this would involve removing the kitchen, and I really don't want to go down that route.
I'm thinking that if I just snip off the loose bits of the hole, and then maybe plug the hole with some superglue or something similar, that would do the trick... I'm not too fussed about it looking immaculate, but a little less crap would be good. Photo attached...
Thanks
dave

After coming back from the dealers after a new wiring loom to fix our persistent airbag light problem, I found some damage on the flooring.... I think that was caused by removal of the seats. I am dealing with VWCS to take it further, but what would you recommend?
ideally, a new floor should be put in, but this would involve removing the kitchen, and I really don't want to go down that route.
I'm thinking that if I just snip off the loose bits of the hole, and then maybe plug the hole with some superglue or something similar, that would do the trick... I'm not too fussed about it looking immaculate, but a little less crap would be good. Photo attached...
Thanks
dave
