Battery status voltage/ capacity error?

Egronnes

Egronnes

Messages
36
Location
Stavanger, Norway
Vehicle
T4 Hightop
E7C053C5-758B-4D5E-B852-2CD03136F898.jpeg How is this possible? It’s about 1.05 in the morning and the solar panels hasn’t done anything in hours. Still the battery shows 12.9 volts and look at the bars! When I double checked with the regulator, it says I’m down even more, at 50%. I kept the Webasto and fridge on for hours, so the battery is definitely resting. It’s an Exide ES1600 gel battery.
 
View attachment 38841 How is this possible? It’s about 1.05 in the morning and the solar panels hasn’t done anything in hours. Still the battery shows 12.9 volts and look at the bars! When I double checked with the regulator, it says I’m down even more, at 50%. I kept the Webasto and fridge on for hours, so the battery is definitely resting. It’s an Exide ES1600 gel battery.
When was the last time you Actually switched the Control Panel OFF and then switched ON with the VW start-up Logo.
The Voltage and calculations of battery capacity can be a little off and not that accurate, especially over time.
 
It’s a T4. There’s no on/off there. The batteries has been replaced recently, so everything is reset that way.
 
View attachment 38841 How is this possible? It’s about 1.05 in the morning and the solar panels hasn’t done anything in hours. Still the battery shows 12.9 volts and look at the bars! When I double checked with the regulator, it says I’m down even more, at 50%. I kept the Webasto and fridge on for hours, so the battery is definitely resting. It’s an Exide ES1600 gel battery.
Not entirely sure I understand the problem. What's the 'regulator' you refer to?
 
Not entirely sure I understand the problem. What's the 'regulator' you refer to?
The solar panel regulator. My understanding is that a full battery reads about 12.7 to 13.3-ish (depending on resting time since charging) So 12.9 is way above what the bars are telling me. The voltage should be around 12.5-12.6v at that battery level (bars).
 
It’s a T4. There’s no on/off there. The batteries has been replaced recently, so everything is reset that way.
If there is no On/Off then what is the switch on the top row 2nd from R.?
 
If there is no On/Off then what is the switch on the top row 2nd from R.?
That's the button you press in combination with another button to turn various accessories on. i.e Snowflake + On/Off turns the fridge on.
 
The solar panel regulator. My understanding is that a full battery reads about 12.7 to 13.3-ish (depending on resting time since charging) So 12.9 is way above what the bars are telling me. The voltage should be around 12.5-12.6v at that battery level (bars).
Ah okay. I don't have solar but my understanding of the battery readout is that the bars simply represent the percentage capacity the battery has remaining at the voltage it currently reads, in this case about 70% capacity. I think 12.9V is a good healthy battery, especially if you've been running your heater and fridge for a while. The voltage becomes an issue when you've got a reading below 12V as switching on the heater or fridge could cause it to dip and cause a low voltage lock out.
 
At 1-05 am, I literally couldn’t give a.......
 
Back
Top