DIY fit reverse camer

B

Bjohnson

VIP Member
Messages
427
Location
Bath
anyone done it?

I've got the kenwood head unit, it should be a plug and play install but the ball ache will be running the wiring through the van to the front.
 
I’ve done it on a T5 kombi and recently did a rear dashcam on our T6 Ocean which is similar. Your biggest pita will be a) getting the glovebox out to run the wire up the left hand A pillar b) getting the plug through the tailgate gaiter and c) removing the tailgate trim. You just need perseverance for those.

Once you’re at the A pillar it’s surprisingly easy to get the wire to the tailgate read my post #69 here from para 7 onwards:


I think you can get the wire up the A pillar without removing it by removing the door seal and tucking it behind.

Good luck.
 
anyone done it?

I've got the kenwood head unit, it should be a plug and play install but the ball ache will be running the wiring through the van to the front.

All depends on what Kenwood headunit and interface is used

It’s not that bad to run cable through
 

VW California Club

Back
Top