Black Forest
VIP Member
2023 Cali Beach 204 4Motion Lhd
I have two sets of Springfields, summer and winter. Both sets fitted with the wheel sensor, identified by looking at the valve type. On the Vehicle / Driver Assist section of Discover Pro there is no mention or display showing individual wheel pressures. Just the picture of the van and the "Set" button.
Am I missing something here as I'm going to buy new wheels and if the "Direct" system wasn't fitted, it would be cheaper and easier. The Non-direct ABS system would be easy to set up.
With Direct wheel fitted sensors, does this show tyre pressures automagically or is there something I need to activate? Also, why have these in 2 sets of wheels if there is nothing to "read" them fitted to the van?
Another spec anomaly is the build shows an 80litre tank fitted but I thought this wasn't possible with the ad-blu system? I have filled over 70 litres previously....
I have two sets of Springfields, summer and winter. Both sets fitted with the wheel sensor, identified by looking at the valve type. On the Vehicle / Driver Assist section of Discover Pro there is no mention or display showing individual wheel pressures. Just the picture of the van and the "Set" button.
Am I missing something here as I'm going to buy new wheels and if the "Direct" system wasn't fitted, it would be cheaper and easier. The Non-direct ABS system would be easy to set up.
With Direct wheel fitted sensors, does this show tyre pressures automagically or is there something I need to activate? Also, why have these in 2 sets of wheels if there is nothing to "read" them fitted to the van?
Another spec anomaly is the build shows an 80litre tank fitted but I thought this wasn't possible with the ad-blu system? I have filled over 70 litres previously....
