Glove box and GPS set-up (DiY)

[Andresz]

I did it myself and I find it very convenient.

The hammer is fixed to the bottom, and has the seat belt cutter and torch embedded.

The GPS cable easily goes through the upper slot of the glove box. The GPS TMC antenna works perfectly too.

 

[calikev]

Good work there similar to mine I have a double 12v socket and have run a aux cable and phone charger cable under the radio and out the dash tray

 

[Andresz]

Good work there similar to mine I have a double 12v socket and have run a aux cable and phone charger cable under the radio and out the dash tray

Thanks Calikev.
In my opinion the stock solution of the 12V socket in the drawer, as the only one in the front, if rather shameful for VW.

 

[Andresz]

of course, it is all reversed for you in UK :smile

 

[James]

of course, it is all reversed for you in UK :smile

And you get the LHD dash the different one to the RHS Cali's?

James

Oh god solution by the way - impressed :goodone

James

 

[Andresz]

of course, it is all reversed for you in UK :smile

And you get the LHD dash the different one to the RHS Cali's?

James

Oh god solution by the way - impressed :goodone

James

Actually, I do not know, is it reversed (mirrored), or is it the same on the other side? (I mean the airbag switch placement)