How-To install DC-DC charger to replace VW Split Charge relay

I have a T6.1 Beach with only one leisure battery under the left seat, and the upper display monitor shunt is attached to the negative terminal of that battery. I had a Victron SmartShunt installed right before the factory shunt under the passenger seat next to the battery. They were also able to fit the 100/20 SmartSolar controller under there too. It’s tight, but it all fit.
 
I have a T6.1 Beach with only one leisure battery under the left seat, and the upper display monitor shunt is attached to the negative terminal of that battery. I had a Victron SmartShunt installed right before the factory shunt under the passenger seat next to the battery. They were also able to fit the 100/20 SmartSolar controller under there too. It’s tight, but it all fit.
Thanks, yes I noticed that yesterday, the new vw shunt is so compact and they are like "built-in" into each battery and they do a SUM inside the control unit.

I'm using 75/15 victron MPPT to handle 300w solar it's even more compact. Also I replaced both 75AH leisure batt with 2x 314ah 12v EVE batt, they fit perfectly in both original location. now 8x usable capacity than original VW leisure batt
 

Similar threads

Back
Top