Charging Ecoflow Delta 2 from 12 volts + 191 watts. Fully charged.

[G-A-R-Y]

I thought I'd start a new thread, we'd always charged the ecoflow with a fold out solar panel(120w) if away for more than a weekend. Always moving panels to face the sun and wires trapped in the rear doors. BUT it never fully charged or kept up with outdoor induction or air fryers.

Today I used a Ecoflow solar lead and connected it directly to the Lithium battery via a big fuse.
I was surprised to see 191 watts going in, it's the proper solar xt60i with the link.
I think that works out to 14 amps from 13.2 volts of lithium.

I sat there for a couple of hours checking all connection for heat and all was fine.

I'll test further and give updates to help others. Advice welcomed.

 

[GordonH]

It’s a known feature when using an XT60i lead. To do with the centre blade which is connected to the -ve on the solar lead so the EcoFlow draws the maximum solar current level which is 15A.